MBD-X10SRH-CLN4F -B | X10SRH-CLN4F (Bulk Pack) |
Form Factor | ATX |
Dimensions | 12" x 9.6", (30.5cm x 24.4cm) |
CPU | Intel Xeon processor E5-2600 v4*/ v3, E5-1600 v4*/ v3 family (up to 145W TDP **) |
Single Socket R3 (LGA 2011) |
Core / Cache | Up to 22 Cores* / Up to 55MB* Cache |
Note
| * BIOS version 2.0 or above is required |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
** E5-1600 series CPU does not support LRDIMM type memory |
Memory Capacity | 8x 288-pin DDR4 DIMM slots |
Up to 1TB ECC 3DS LRDIMM |
Up to 512GB ECC LRDIMM |
Up to 256GB ECC RDIMM |
Memory Type | 2400*/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes | 3DS LRDIMM: 128GB |
LRDIMM: 64GB, 32GB |
RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
Detects double-bit errors (using ECC memory) |
Chipset | Intel C612 chipset |
SAS | SAS3 (12Gbps) via Broadcom 3008 |
SW RAID 0, 1, 10 |
SATA | SATA3 (6Gbps) via C612 controller |
RAID 0, 1, 5, 10 support |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
ASPEED AST2400 BMC |
Network Controllers | Intel i350-AM4 Quad Port Gigabit Ethernet |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics | ASPEED AST2400 BMC |
SAS | 8x SAS3 (12Gbps) ports |
SATA | 10x SATA3 (6Gbps) ports |
LAN | 4x RJ45 Gigabit Ethernet LAN ports |
1x RJ45 Dedicated IPMI LAN port |
USB | 4x USB 3.0 ports (2 rear + 1 via header + 1 Type A) |
8x USB 2.0 ports (2 rear + 6 via header) |
Video | 1x VGA port |
Serial Port / Header | 2x fast UART 16550 serial, 2 COM ports (1 rear, 1 header) |
SuperDOM | 2x SuperDOM (Disk on Module) ports with built-in power |
TPM | 1x TPM Header |
1U Chassis (Optimized for X10SRH-CLN4F ): | SC813MFTQ-441CB |
SC813MFTQ-R400CB |
SC813MFTQ-R606CB |
SC113MFAC2-R606CB |
SC113MFAC2-605CB |
2U Chassis: | SC823TQ-653LPB |
SC213A-R740LPB |
SC825TQ-R720LPB |
SC826BAC4-R920LPB |
SC216BAC-R920LPB |
SC826BE1C-R920LPB |
SC216BE1C-R920LPB |
3U Chassis: | SC836BE1C-R1K03B |
SC833T-653B |
SC836TQ-R500B |
Mid/Mini Tower Chassis: | SC732i-500B |
4U / Tower Chassis: | SC847BE1C-R1K28LPB |
SC842TQ-865B |
SC842TQ-665B |
SC743T-665B |
SC846BE1C-R1K28B |
Important Chassis Notes | To support the new generation IntelXeon processor-based motherboards, Revision M chassis is recommended. |
SuperServer(s) with X10SRH-CLN4F | SYS-5048R-E1CR36L |
SSG-5028R-E1CR12L |
PCI-Express | 1x PCI-E 3.0 x4 (in x8) slot |
1x PCI-E 3.0 x8 (in x16) slot |
2x PCI-E 3.0 x8 slots |
1x PCI-E 2.0 x2 (in x4) slot |
1x PCI-E 2.0 x4 (in x8) slot |
System BIOS | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) |
APM 1.2 |
DMI 2.3 |
PCI 2.3 |
ACPI 1.0 / 2.0 / 3.0 / 4.0 |
USB Keyboard support |
Hardware BIOS Virus protection |
SMBIOS 2.7.1 |
UEFI 2.3.1 |
RTC (Real Time Clock) Wakeup |
Software | IPMI 2.0 with KVM support |
SuperDoctor 5 |
Watch Dog |
Power Configurations | ACPI Power Management |
Keyboard Wakeup from Soft-Off |
CPU Fan auto-off in sleep mode |
Power-on mode for AC power recovery |
Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN | Total of 6 fan headers supporting up to 6 fans |
6 fans with tachometer status monitoring |
Status monitor for speed control |
Status monitor for on/off control |
Low noise fan speed control |
Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment |
CPU thermal trip support |
I2C temperature sensing logic |
Thermal Monitor 2 (TM2) support |
PECI |
LED | CPU / System Overheat LED |
Suspend static indicator LED |
UID/Remote UID |
Other Features | Chassis intrusion detection |
Chassis intrusion header |
Chipkill support |
RoHS, Halogen Free |
Operating Temperature Range | 0°C ~ 50°C (32°F ~ 122°F) |
Non-Operating Temperature Range | -40°C ~ 70°C (-40°F ~ 158°F) |
Operating Relative Humidity Range | 8% ~ 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% ~ 95% (non-condensing) |